| The technology and technical key points for Rubber strip type of insulating glass production |
| Date：2013-10-25 Author：zhaoyang Hits：867 |
| Hollow glass composite tape process and use of equipment configuration, there are a lot of Sang Jin , coincidence of the Department, such as : seeking design , cutting stock under glass , glass cleaning and drying , according to user requirements and design, with aluminum groove type hollow the same glass , glass cutting stock , with the same groove aluminum hollow glass , glass washing and drying , with the same aluminum groove type insulating glass , plastic strips mounted coupling piece strip is mounted coupling piece hollow glass composite tape an important part of glue installed together pieces of technical points : A, mounting tape, requires the use of special tools - tape installer to ensure that the tape parallel to the glass ; B, keeping the glass clean cavity , to ensure the quality of hollow glass ; C, four strips around the corner which left a small mouth, and so when hot exhaust ; Hot forming Thermoforming hollow glass adhesive is the final steps , the pressing quality directly affects the quality of products .Hollow glass bead must be heated prior to pressurization , its purpose is to improve the strip viscosity, increase the adhesion between the glass and strips solid level , to ensure proper sealing performance.
B, glass allowed dislocation, must remain parallel ; strip temperature 37.7 ~ 38.8 ℃ most appropriate. |
| Previous： Punched technical analysis for Cutting machine |
| Next： The process and procedures in the Hollow glass production |
TELL:+86 1902521703 Cell:+8615866605088（wechat/whatsapp)
@: brady0086@hotmail.com Wechat:brady0086 Skype:brady0086 QQ:1156692876
ADD:3966 ERHUANDONG ROAD,JINAN,250013,CHINA
